Crucial 8GB DDR3 1600 UDIMM desktop memory

Crucial 8GB1600 UDIMM desktop memory

Description

Crucial 8GB 1600 UDIMM desktop memory

Desktop modules that operate at speeds up to 1600 MT/s and have a CL11 latency. It is dual voltage and can operate at 1.35V or 1.5V. It is Unbuffered and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins and is compatible with computers that take DDR3 UDIMM memory.

A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.

Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules).

To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket.

The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins.

• Improve your system’s responsiveness, run apps faster and multitask with ease
• Install with ease; no computer skills required. How-to guides available at Crucial
• Compatibility assurance when using the Crucial System Scanner or Crucial Advisor Tool
• Micron quality and reliability is backed by superior component and module level testing and 42 years of memory expertise
• ECC Type = Non-ECC, Form Factor = UDIMM, Pin Count = 240-pin, PC Speed = PC3-12800, Voltage = 1.35V/1.5V, Rank and Configuration = 2Rx8